You can change the overlap of the Single by following the steps below.

1.) Remove the MicroSD Card from your Sentera Sensor and insert it into your PC.

2.) Browse to the file labeled “UserSettings.txt”.  It can be opened with Microsoft Notepad, Microsoft Word or any other text editor.

3.) In the document, you are going to the “OverlapPercent=30” and change from 30 to 80% and it can then be left at the setting going forward.


4.) Save the changes and insert the Card back into the Sentera Sensor.  The change will remain in effect until you change it again or replace the MicroSD Card.