The left dial of the white DJI controller controls the tilt and pan. Moving this dial will control either the tilt or the pan. To toggle between controlling either pan or tilt, press the C1 button on the bottom of the controller.

If this does not work, the C1 button will need to be allocated to toggle the left dial to yaw (pan).


To do this, click the controller image on the top bar of the DJI Go app, shown below.Then select “Remote Controller Settings” and then click “C1”. Finally, select “Toggle Yaw/Pitch”.


If any of these steps do not appear, make sure both the white hand controller and vehicle are powered on and that the Zenmuse camera is installed. Ensure the mobile device is plugged into the white DJI hand controller and that live video from the Zenmuse is streaming on the screen.


Next - Manual Flight - DJI Go App

Next - Autonomous Flight - FieldAgent™

Next - Downloading and Viewing Images From a Zenmuse Camera


Previous - DJI Zenmuse Camera Gimbal Controls