Please follow the following steps to install and stream Double4K video to your iOS handheld device.  Field Stream is the preferred application for video streaming OMNI video directly to iOS devices.  

Download the Field Stream from the App Store or contact Sentera Support for more information on how to locate the Field Stream application for iOS.  

Ensure the OMNI GCS is setup and connected to the OMNI vehicle as detailed in the Omni GCS Setup section.  The iOS device will need to connect directly to the OMNI GCS to stream the video.

Item Description Action
1 On the iOS home screen, select Settings.

2 Select WiFi to see the available connections.
3 Select the Omni comms box you would like to connect to.  
4 You will be prompted to enter the WiFi password for the Comms Box.  The password is the full serial number of the Comms Box entered twice.  For example, the serial number is 0038.  The Password used to connect to this Comms Box is:  00380038
5 Once you have entered the password, select Join.  It may take a few seconds for the authentication to occur.
6 Once you have connected to the Omni Comms Box, navigate to the home page and launch Field Stream.  
7 If connected to a vehicle that is streaming video the video should display automatically. If no video is displayed or the "Looking for video stream..." display is present for more than 30-60 seconds attempt to kill the Field Stream application and restart.  Also, verify you are still connected to the Omni Comms Box.  

If you encounter further issues, please contact Sentera Support for additional help.  

Next - Manual Flight - DJI Go App

Next - Field Stream - Windows Install

Previous - Double 4k Camera Controls