Flight Operations - General Questions - OMNI

Connecting to the Vehicle - DJI Go App - OMNI
Ensure that the vehicle is powered on and that the device is connected to a powered DJI hand controller.  Details on these steps can be found here: Inst...
Fri, 19 Jan, 2018 at 2:44 PM
Double 4K Camera Controls - OMNI
In order to perform basic gimbal controls, such as zoom, tilt, snapshots, or choosing which camera is streaming live video, the gimbal hand controller must ...
Fri, 19 Jan, 2018 at 2:45 PM
DJI Zenmuse Camera Gimbal Controls (X3, X5, XT) - OMNI
The following page contains instructions on how to switch "Left Dial" to pan. Next - Panning a Zenmuse Camera (X3, X5, XT) Previous...
Tue, 7 Nov, 2017 at 1:51 PM
Manual Flight - DJI Go App - OMNI
The Omni System is built on the DJI M100 Drone system. Below is a very basic guide to flying this drone. For more detailed instructions, see the DJI M100 Ma...
Fri, 19 Jan, 2018 at 2:46 PM
Autonomous Flight - FieldAgent™ - OMNI
Before Launching FieldAgent™:     1. Check the vehicle for damage     2. Ensure the flight area is safe for take-off     3. Power on vehicle     4. Laun...
Fri, 19 Jan, 2018 at 2:46 PM
Preflight Checklist - OMNI
Next - FieldAgent™ Mobile Previous - Autonomous Flight - FieldAgent™
Thu, 18 Jan, 2018 at 8:05 AM
Switching Video Stream Source Camera While in Flight - Omni UAV
The DJI Go mobile app is only able to show one camera on screen at a time. Either the Zenmuse or the Double 4K. It should be noted that each camera is c...
Fri, 19 Jan, 2018 at 2:47 PM
Viewing Both Cameras Simultaneously - Omni UAV
VLC is only capable of streaming the Double 4K camera. The DJI Go app has the ability to switch between both video streams. To view both a Zenmuse and t...
Fri, 19 Jan, 2018 at 2:47 PM
Panning a Zenmuse Camera (XT, X3, X5) - OMNI
The left dial of the white DJI controller controls the tilt and pan. Moving this dial will control either the tilt or the pan. To toggle between controlling...
Fri, 19 Jan, 2018 at 2:48 PM
Calibrating the Compass - Omni
Fri, 19 Jan, 2018 at 2:50 PM